RMJ_Contax Zeiss series is designed to house vintage German Zeiss lens for building anamorphic lenses, it features:

• 77mm female front thread, screw directly into the back of Rapido V3 Clamp

• Easy integration with Rapido FMJ and Rapido FVD to build a professional looking anamorphic lens

• Maintain min distance between taking lens and anamorphic projection lens

• Standard 0.8 module geared ring for iris control

• Compatible with Leitax Contax to Canon EF lens mount

• Support following lenses, both AEJ and MMJ versions

• Zeiss Contax_28/2.8 AEJ/MMJ

• Zeiss Contax_35/2.8 AEJ/MMJ

• Zeiss Contax_50/1.4 AEJ/MMJ

• Zeiss Contax_85/2.8 AEJ/MMJ

• Zeiss Contax_135/2.8 AEJ/MMJ

Setup Instruction:

1. Set focus at INF, and tape focus ring to the lens body with electrical tape

2. Slide the Zeiss Lens into the jacket body

3. Screw the front adapter to the front of Zeiss lens

4. Tighten three screws to lock down the front adapter with the RMJ body

5. Tighten four set screws from the side

6. Slide the gear ring from the back, and tighten three set screws to lock down the gear ring with the iris ring, adjust the tightness of the set screw until iris ring can be rotated freely from end to end, and iris open & close as expected

7. Screw on the rear lock ring, and tighten the set screw to secure it. Make sure the iris ring can still rotate freely

8. Attach the Contax to CANON EF adapter