Products‎ > ‎RAPIDO SINGLE FOCUS‎ > ‎

System Specifications

CONTROLLER FEATURES
Single-axis stepper motor control system with encoder interface
Smooth, precise and fast stepper motor movements 
Supply voltage: 10V to 30V DC, 12V is recommend
1 Switch to switch run & calibration mod
3 Push Buttons to turn motor left, right, and record position
Compact design measuring roughly 5 X 2.5 X 1.7 inches
Mini-USB port for firmware upgrades and PC communication
256 microstep resolution
Professional aviation connectors
Weight 5.9 oz (0.37lb, 0.17kg)



MOTOR UNIT FEATURES: 
Gear ratio: 4.13
step angle: 1.8 degree
Position accuracy: +-5%
Weight: 0.28kg
Maximum holding torque of the motor: 36.11 oz.inch
Maximum holding torque on the bigger gear shaft: 149.25 oz.inch
Standard 0.8 module driving gear
Professional aviation connectors
Weight 11.7 oz (0.73 lb, 0.33kg)



ENCODER UNIT FEATURES: 
Magnetic non-contact quadrature encoder
360 cts/rev with 4X decoding
Precision mounting fixture to guarantee accurate reading
Closed mounting package to prevent dust
Professional aviation connectors
Weight 1.9 oz (0.12 lb, 0.05kg)
Supported manual follow focus units: 
An independent encoder unit is also available upon request

Comments